GDL · ATC
GDL100-25-24Z/2.5
2.5 kW rated · ISO25
24,000 rpm rated · Water-cooled
Ø100 mm · 130 mm clamp
View specifications →HQD GDL SERIES
GDL ATC Spindles
Automatic tool change with a defined taper interface. Check the air supply, sensing, toolholder and release sequence for the exact model.
FILTER SPINDLES
Compare GDL configurations.
Start with tool change and cooling. Then narrow the models by interface, power, speed or winding.
More filters
Choose a winding voltage, not a voltage shown on a power curve. Ask us if the voltage you need is not listed.
Showing 9 spindles
GDL100-
GDL · ATC
GDL110-30-18Z/3.2
3.2 kW rated · BT30
18,000 rpm rated · Water-cooled
Ø110 mm · 132 mm clamp
View specifications →
GDL · ATC
GDL120-30-24Z/5.5
5.5 kW rated · BT30
24,000 rpm rated · Water-cooled
Ø120 mm · 496.5 mm overall · 136 mm clamp
View specifications →
GDL · ATC
GDL125-40-12Z/7.5
7.5 kW rated · BT40
12,000 rpm rated · Water-cooled
Ø125 mm · 618 mm overall · 172 mm clamp
View specifications →
GDL · ATC
GDL40.5-ISO20-24Z/2.2
2.2 kW rated · ISO20
18,000 rpm rated / 24,000 rpm max · Air-cooled
372.5 mm overall
View specifications →
GDL · ATC
GDL70-24Z/9.0
ISO30 · Long nose
9 kW at S6-60%, TA20°C · ISO30
24,000 rpm rated · Air-cooled
ISO30 · Long nose · 551 mm overall
View specifications →
GDL · ATC
GDL70-24Z/9.0
ISO30 · Short nose
9 kW at S6-60%, TA20°C · ISO30
24,000 rpm rated · Air-cooled
ISO30 · Short nose · 471 mm overall
View specifications →
GDL · ATC
GDL70-24Z/9.0B
9 kW rated · ISO30
24,000 rpm rated · Water-cooled
483.5 mm overall
View specifications →
GDL · ATC
GDL80-20-24Z/2.2B
2.2 kW rated · ISO20
24,000 rpm rated · Water-cooled
Ø80 mm · 335 mm overall · 98 mm clamp
View specifications →No matching configuration. Clear a filter or send us the details of your existing spindle.
INSTALLATION FIRST
Check the exact model before ordering.
Match the exact code, tool interface, winding, operating range and dimensions. Check cooling, pneumatic and sensing connections where applicable.